Quid magis est saxo durum, quid mollius unda? Dura tamen molli saxa cavantur aqua.

Publio Ovidio Nasone (43 a.C. - 18 d.C.) - Ars Amatoria, Liber I

References

Ciccu R., Grosso B.: Improvement of Disc Cutter Performance by Water Jet Assistance, Rock Mechanics and Rock Engineering, May 2013, DOI 10.1007/s 00603-013-0433-4

Ciccu R., Grosso B, Bortolussi A.: Effect of the stress state on waterjet performance in rock slotting, 12rd International Mining Congress Of Turkey Antalya, 2013, Ed.Mersem, ISBN: 9786050104677

Ciccu R.: Application of waterjet in stone quarrying and processing, 8th International Marble and Natural Stone Congress, Afyonkarahisar, Turkey, 13-15 December 2012.

Bortolussi A., Ciccu R., Grosso B.: Wedge effect influence in water jet cutting of rocks – 21st International Symposium on Mine Planning and Equipment selection – MPES 2012 – New Delhi, India, November 28-30, 2012.

Ciccu R., Grosso B.: Improvement of the excavation performance of mechanical tools by waterjet assistance, 4th International Colloquium of non-blasting rock extraction, 14-16 november, 2012 Freiberg, Germany.

Ciccu R., Costa G.: Waterjet Rough Finishing of Stone Surface, in: Journal:Tehnicki Vjesnik-Technical Gazette, Volume 19, Issue 2, Jun 2012. pp. 373-379. ISSN 1330-3651.

Ciccu R., Costa G.: Recycling of secondary raw materials from end-of-life car tires, Proc. Int. Conf. The Sustainable City VII, Vol. 2, Ancona, Italy, May 7-9, 2012. pp. 1115-1126, ISBN (print only): 978-1-84564-676-9.

Ciccu R., Kurşun I.: Potential advances in flotation by using water jets, Physicochemical problems in mineral Processing, 46, 2011. pp. 35-50. ISSN 1643-1049.

Ciccu R., Grosso B., Rombi J., Tronci P.: PRB construction using high velocity water jet technology – Laboratory experiments Proc. the 9th International Conference on Clean Technologies for the Mining Industry – CLEANMINING 2011, Santiago, Chile. 10-12 April 2011, Ed Gecamin Ltd. Grafhika. ISBN 978 956 8505 43 4

Ciccu R., Costa G.: Waterjet dismantling of end-of-life oversize dumper tyres. Proc. the 9th International Conference on Clean Technologies for the Mining Industry – CLEANMINING 2011, Santiago, Chile 10-12 April 2011, Ed Gecamin Ltd. Grafhika. ISBN 978 956 8505 43 4.

Ciccu R., Grosso B.: Improvement of Mechanical Tool Performance by Waterjet Assistance, Proc. Mine Planning and Equipment Selection (MPES) Conference, 11–3 December 2010, Fremantle, Western Australia – Published by The Australasian Institute of Mining and Metallurgy

Ciccu R., Deiana P., Mei G., Tilocca C.: Suitability of Sulcis coal for CWS preparation, Proc. 2010 International Pittsburgh Coal Conference Istanbul, Turkey October 11–14, 2010.

Ciccu R., Grosso B.: Improvement of the excavation performance of PCD drag tools by waterjet assistance – Rock Mechanics and Rock Engineering – Volume 43, Number 4, July 2010. Springer Wien. ISSN 0723-2632 (Print) 1434-453X (Online). pp. 465 – 474.

Ciccu R., Bortolussi A.: Stone surface finishing by pulsed water jets, Proc. Global Stone Conf. 2010, Alicante, February 2010. ISBN: 978-84-614-1147-4.

Ciccu R., Cigagna M., Grosso B., Tronci P.: An innovative way for the construction of PRBs Symposium VIII CTWMI Expomin 2008, Santiago (Chile) April 2008.

Ciccu R., Cigagna M., Grosso B., Tronci P.: In situ soil remediation with HP waterjet, Proc. 16th Int. Symp. on Mine Planning and Equipment Selection and 10th Int. Symp. on Environmental Issues and Waste Management in Energy and Mineral Production, Bangkok (Thailand). December 11-13 2007, pp. 144-156 Ed. The Reading Matrix Inc., Irvine, CA (United States) ISBN 978-0-9784416-0-9; ISSN 1913-6528.

Ciccu R., Grosso B., Loddo C., Bortolussi A.: Enhancement of tool performance in mechanical excavation with waterjet assistance, Proc. Fifteenth International Symposium on Mine Planning and Equipment Selection, Torino, Italy, 20–22 September 2006. pp. 1314-1323. ISBN 88 901342 4 0.

Bortolussi A., Ciccu R., Grosso B.: Improvement of abrasive jet efficiency in cutting operations, Proc. 18 th International Conference of Water Jetting, Gdansk, Poland, September 2006 – Peter Longman Ed. BHR group Cranfield UK ISBN 1 85598 080-0.

Bortolussi A., Ciccu R., Grosso B., Loddo C, Pistis S., Vašek J.: Improvement of disk cutters performance in the excavation of small tunnels. Proceedings MPES 2005 Calgary, November 2005.

Bortolussi A., Ciccu R., Grosso B., Loddo C., Vasek J.: Mechanical excavation of hard rocks, Mine Planning and Equipment Selection, 2004 (pp. 189-195). ISBN 04-1535-937-6.

Agus M., Bortolussi A., Careddu N., Ciccu R., Grosso B., Marras G.: Multi-pass abrasive waterjet cutting strategy, 16th International Conference on Water Jetting, Edited by Paul Lake, Published by BHR Group Limited, The Fluid Engineering Centre, Cranfield, UK (C) BHR Group 2002, pp. 243-257. ISBN: 1 85598 042 8

Bortolussi A., Careddu N., Ciccu R., Manca M.G., Olla S.: Surface finishing of marble with abrasive waterjet, 16th International Conference on Water Jetting, Edited by Paul Lake, Published by BHR Group Limited, The Fluid Engineering Centre, Cranfield, UK (C) BHR Group 2002, pp 425-435 ISBN: 1 85598 042 8.

Bortolussi A., Ciccu R., Grosso B.: Cutting of reinforced concrete using abrasive suspension jet , Proc. American Water jet Conference, Minneapolis, WaterJet Technology Association. August 18-21, 2001. ISBN 13: 9781880342152.

Agus M., Bortolussi A., Careddu N., Ciccu R., Grosso B.: Optimisation of abrasive-workpiece matching, Proc. 15th Int. Conf. On Jetting Technology Ronneby, Sept. 2000, pp.171-180.

Ciccu R., Serci A.: Recupero e riciclo dell’abrasivo nel taglio a getto d’acqua, VII Giornata Nazionale WATERJET, Verona, September 1999.

Bortolussi A., Ciccu R., Grosso B., Manca P.P.: Improvement of waterjet performance in granite slotting by relief of compressive stress, Proc. Int. Symp. on new applications of Waterjet Technology, Japan, October 1999.

Ciccu R., Grosso B., Ortu G., Agus M., Bortolussi A., Vašek J., Jekl P.: Rock disintegration using waterjet-assisted diamond tools. Proc. 10th AWJC (Hashish Ed.) WTA Houston, august 1999, pp.465-477.

Copyright © 2015 AQUAVIS srl. All Rights Reserved Frontier Theme